Network

The Distance vector Protocol finds the path to remote network by judging the distance. The vector indicates the direction to the remote netw...

There are 3 such Protocols. 1. Distance vector. 2. Link State. 3. Hybrid.

There are 4 types dynamic routing protocol. 1.RIP - Routing Information protocol. 2.IGRP - Interior Gateway Routing Protocol. 3.EIGRP ...

There are two types 1.Static Routing. 2.Dynamic Routing. Static Routing: Manually assigning route to destination by adding information i...

Ans 1: Routing (or routeing) is the process of selecting paths in a network along which to send network traffic. Ans 2: Routing is a method...

The range of class C address is from 192 to 223(192.0.0.0 to 223.255.255.255).In class first 3 octets is given to network part and the remai...

The range of class B address is from 128 to 191(128.0.0.0 to 191.255.255.255). In class B 2 octets is given to Network part and remaining 2 ...

In class A address first 8 bits is used for network and next 24 bits is use for hosts. If the first bit is zero in network side then it is c...

IPV4 is divided into 5 classes, 1. Class A - Public address. 2. Class B - Public address. 3. Class C - Public address. 4. Class D - Multicas...

IP version 4 is a set 32 binary bits. There are over 2 to the power 32 IP addresses i.e 4.3 billion address. Thus converting this 32 bit IP...

IP is classified into two, 1. IPV4 - IP version 4. 2. IPV6 - IP version 6. The IP address concept is developed and managed by IANA. IANA- In...

IP address is logical numeric address given to the host, uniquely to identify the host participating in the Network. IP address is a set of ...

Repeater is a device that reads the data packets fully and retransmits those data packets with full strength. The Repeaters are used to avoi...

Brouter is a combination of Router and Switch. It performs the operation of both Router and Switch. brouter has to maintain both routing as...

Router is a device that finds the shortest path between in network. It connects the LAN and WAN. Router is layer 3(network layer) device. I...

Switch is also a Networking device used to connect the host together to form a network. It works in data link layer with full duplex communi...

Hub is networking device used to connect the hosts together to form network. Hub works in physical layer with half duplex communication.

The physical devices used to connect the hosts to form a network are Networking devices. The Networking devices are mentioned below. 1.Hub. ...

Topology is broadly divided into 4 types. 1.Bus. 2.Mesh. 3.Star. 4.Ring.

It is Physical layout to show how the hosts are connected in a Network.